FrSky ACCESS

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • FrSky ACCESS

      Es hat sich in den Daten zu X-Lite S / Pro bereits angedeutet, nun gibt es offiziell einen Haufen Infos zum neuen Protokoll. Ich markiere einfach mal rot, was ich für ganz besonders toll halte :)

      Quellen:
      frsky-rc.com/frsky-advanced-co…-access-protocol-release/
      rcgroups.com/forums/showthread…w-ACCESS-protocol-release

      --------------------

      Protocol Introduction

      FrSky is constantly looking to improve the performance and reliability of RC transmission. The FrSky ACCESS protocol is the most advanced to date as it offers more features than traditional protocols.

      FrSky has developed excellent new ideas that expand the role that a traditional protocol would play. Building on our well acclaimed ACCST protocol, ACCESS offers visionary features like Smart Share™, Smart Match™, and Trio Control ™. Once a receiver is bound to a radio, it can be re-bound at any time without accessing your receivers bind button. Sharing models has never been easier, and updating has also been simplified, you no longer need to physically connect your receivers for updating. In addition, new tools like a Spectrum Analyzer and Power Meter are now available on your transmitter.

      Always on the cutting edge of technology, we have developed ACCESS to improve your flying experience and allow you to do more with your transmitter and receiver than ever before.

      Main Functions and Features

      Elevated performance with faster baud rate and lower latency
      • Supports 24 full-range channels
      • Increased baud rate and lower latency
      More convenient M2M (Multi to Multi) technology
      • Wireless binding, updates, and configuration
      • Automatic binding (Smart Match™)
      • Channel remapping
      • Manageable telemetry (Trio Control ™)
      More reliability and safety – Anti-interference and Anti-hijack system
      • Allows radio to act as a Spectrum Analyzer
      • Allows radio to act as a Power Meter
      • Advanced Encryption Algorithm
      Q&A

      Q: What is Smart Match™ ?
      A:Now you get extra security before you fly. Smart Match™ acquires dual certification from your receiver and your transmitter to give you double the protection.

      Q: What is Smart Share™?
      A:Now you can bind multiple transmitters to a receiver and Smart Share™ assures that you have a unique certification for each transmitter. If you fly competitively you can set up two identical transmitters and have a spare one ready to go in the event you need it. No need to find the bind button on the receiver. It’s all ready to go. Many clubs have trainer aircraft to help new modelers. Now it is easy to allow authorized multiple transmitters to bind with the trainer aircraft receiver.

      Q: What is Trio Control ™?
      A:ACCESS allows one transmitter to control the signal and/or telemetry for up to 3 receivers per model. Receiver redundancy provides an extra layer of safety when flying larger models.

      Q: Can I update previous FrSky products to the ACCESS protocol firmware?
      A:All previous and present FrSky transmitters can be updated to the ACCESS protocol, The X, XM, RX, GX and S series receiver support will be gradually added to the supported list.


      Q: What are the improvements of ACCESS protocol when compare to ACCST?
      A:The ACCESS protocol supports up to 24 channels with increased transmission rate and lower latency (Total latency from Tx stick input to Rx channel output) and the elevated performance.
      • 8 channel mode: Fixed 11ms latency / Telemetry upstream rate increased 40% / Telemetry downstream rate increased 60%
      • 16 channel mode: 14 ~ 23ms latency / Telemetry upstream rate increased 40% / Telemetry downstream rate increased 60%
      • 24 channel mode: 14 ~ 23ms latency / Telemetry downstream rate increased by 60%
      Q: Is there any differences between the old and new products when using the ACCESS protocol?
      A:Yes. Some of the new functions like the Power Meter were developed and optimized with the new FrSky transmitters (e.g. Taranis X-Lite Pro). When it comes to wireless performance, the new upgraded RF module is built specifically to use the new ACCESS protocol. This will provide a superior link than if used on a standard module.

      Q: What frequency band will be supported by the new ACCESS protocol?
      A:The FrSky ACCESS protocol will be applied to both 900MHz and 2.4GHz working frequency band, but exits the performance differences. And FrSky will release our dual frequency products like the radios, Tx modules and receivers this year.

      Q: In what scenario can I use the Smart Share™ function?
      1. A user has 3 different FrSky radios for each type of aircraft and would like to fly them all with a single radio. As long as the user has already bound to the receivers, they do not need to access the bind button on the receiver to switch transmitters.
      2. RC Competitors often carry a back-up radio just in case something happens to the primary radio. In this case, the pilot can switch to the 2nd radio without accessing the bind button on the receiver of their model.
      3. Clubs that own and operate community special purpose planes, like aircraft for towing gliders up to altitude, will no longer need to only have 1 designated radio for that plane. Each authorized pilot will be able to use his or her own FrSky Transmitter with their own unique identification ID.
      4. A user that wants to share a model with a friend can now allow the user to bind to the model without access to the bind button. When the model is returned, it can simply be re-bound without accessing the bind button.
    • Ich bin mal gespannt wie lange Frsky brauch um die ganzen Updates zu liefern.
      Das war ja in der Vergangenheit nicht ihre Stärke, übersichtlich und ordentlich Firmwares zu veröffentlichen (Stichwort: R9).

      Ich finds cool das man dann nichtmehr an die Receiver ran muss zum Updaten. Habe neulich ein XSR auslöten müssen nur zum Firmware Updaten und das nervt.
      Des Weiteren kann ich dann endlich meine Taranis X9D+ und X-Lite mit allen Receiver parallel binden :thumbsup:
    • OpenTX Entwickler haben hier ein paar Infos zur Kompatibilität zu den D8/D16 Modi gegeben:
      rcgroups.com/forums/showthread…SS-protocol-release/page3

      -> Mit ACCESS kann man die nicht mehr nutzen. Bedeutet auch, dass man nach einem Umstieg z.B. nicht mehr die in den Whoop-FCs integrierten Empfänger nutzen kann. Also bei Gelegenheit mal einen R-XSR oder XM+ einbauen. Alternativ sagen sie kann man die Firmwares immer hin und her flashen, wär mir aber zu umständlich.